Scraps should be cleaned away with hooks, no pulling with hands.

切屑应用钩子清除, 禁止用手拉.

互联网

Operators should stand in safe positions to avoid scraps flying - out.

人站立位置应偏离切屑飞出方向,以免切屑伤人.

互联网

The main wear forms are stock - removing and plough fatique.

其磨损形式为切屑和微量犁沟疲劳.

互联网

Those are similar to the chip in high speed milling.

这些特征与石墨高速铣削时的切屑形貌相似.

互联网

Clean up scraps; keep the machine and environment clean.

清除切屑、擦拭机床, 使机床与环境保持清洁状态.

互联网

This model explains how the shear localized chip segments initiate, become trapezoid and form serrated chips.

该模型解释了集中剪切切屑节块如何启动 、 梯形化并最终形成锯齿形切屑.

互联网

Different kinds of material and machining conditions used will produce chips of different shapes.

选用的材料种类和切削条件不同,可生成不同形态的切屑.

互联网

The influences of some cutting parameters on chip curvature and mechanism of chip - curling are also studied.

本文还研究了一些切削参数对切屑卷曲影响规律及切屑卷曲过程的机理.

互联网

Based on thermodynamics principle, the feasibility for melting iron borings in cupola was ana lysed.

从热力学角度分析了在冲天炉内熔炼铸铁切屑的可行性.

互联网

Chip removal is a factor which influences efficiency and quality of drilling in the drilling operation.

钻削加工中的切屑排除问题直接影响钻孔的效率和质量.

互联网

Long, thin chips by contrast tend to curl around themselves rather than break.

相比之下,长而细的切屑易于自卷而非破裂.

互联网

There are corresponding relations between the deform coefficient and the adjacent tooth distance the saw - tooth chip.

从切屑塑性变形角度分析得出切屑的变形系数与绝热剪切步距的对应关系.

互联网

The processes of directly recycling high density alloy by oxidation - reduction technique are investigated in details.

研究了氧化 - 还原法直接再生回收高密度合金切屑粉末的工艺技术.

互联网

Product main features: high temperature, anti - oxidation, anti - corrosion, anti - creep, wear - resistant and easy to chip, can be welded.

产品主要特点: 耐高温, 抗氧化, 抗腐蚀, 抗 蠕变, 耐磨损,易切屑, 可焊接.

互联网

To measure work - pieces , stop first , and then clean off the cutting scrap of work - piece with brush.

测量工件尺寸时必须停车, 工件上的切屑须用刷子扫.

互联网