Provides an optimum temperature for soldering PCB throughout reflowing operation.

通过回流焊操作为焊接PCB提供最佳温度.

互联网

Reflow solder paste in 2 hours as soon as possible after printing.

印刷后要在2小时内回流焊膏.

互联网

Good management for reflow and wave profile and profile board.

良好的管理为回流焊和波峰焊温度曲线及温度曲线量测板.

互联网

The most obvious is the necessity for increased reflow temperature.

最明显的是,使用无铅锡膏必须提高回流焊温度.

互联网

Hand solder is recommended instead of reflow solder.

不建议使用回流焊,推荐使用手动焊接.

互联网

Do not inhale the vapor during reflow.

不要吸入回流焊时喷出的蒸气.

互联网

Clear how to measuring reflow and wave profile.

清楚怎样测量回流焊和波峰焊温度曲线.

互联网

Suitable for SMT craft reflow soldering.

适用于回流焊SMT工艺.

互联网

CPI special - purpose SMT backflow brazier lubricating oil. textile stereotypia machine stretching machine chain link oil.

CPI专用SMT回流焊炉润滑油. 纺织定型机拉幅机链条油.

互联网

Are outputted boards at least sample inspected pre reflow for placement, missing components, and solder defects?

回流焊输出之板是否至少抽样检查板的置件精度, 有无少件和不良焊点?

互联网

Company - wide introduction of the new Samsung laser vision - Mounter, chip processing line four, imports reflow, wave soldering.

公司引进全新三星全视觉激光型贴片机, 贴片加工线四条, 进口回流焊 、 波峰焊.

互联网

After reflow soldering and restored at room temperature , they meet the characteristics listed below.

经过回流焊并冷却至室温后,电容器的特性符合下表的要求.

互联网

Are Work Instructions readily available to the operator and are they followed at Reflow?

回流焊时有无操作指导书供操作员使用,操作员有无遵循此操作指导书作业?

互联网