断裂韧性是什么意思_断裂韧性用英语怎么说_断裂韧性的翻译_断裂韧性翻译成_断裂韧性的中文意思_断裂韧性怎么读,断裂韧性的读音,断裂韧性的用法,断裂韧性的例句

The accepted designation for the plane - strain fracture toughness under these environments is this.

在这些环境下平面应变断裂韧性所采用的 符号 是这个.

辞典例句

A Charpy test is usually much less expensive to perform than a fracture toughness characterization experiment.

夏比(冲击)试验通常要比断裂韧性试验的费用低得多.

辞典例句

Nano - scale ceramic composites may have high bending strength and fracture toughness.

纳米复合 陶瓷材料可以极大地提高抗弯强度和断裂韧性.

互联网

The fracture of K 1 c and impact specimens were observed by SEM.

通过扫描电镜观察了断裂韧性和冲击试样断口.

互联网

The relationship between fracture toughness and crystal orientation hasbeen also examined.

断裂韧性与晶体学取向的关系亦作了分析.

互联网

The specimen size requirements of determining fracture toughness are also presented.

提出了断裂韧性测试中必须注意的试样尺寸要求.

互联网

Their fracture toughness and hardness were determined with Vicker's indentation test machine.

在维氏硬度仪上测试断裂韧性和硬度.

互联网

The fracture toughness of the bimetallic interfaces is lower than those of respective counterpart metals.

在扩展路径上,界面和金属交替出现,且界面的断裂韧性不如相应单一材料的断裂韧性.

互联网

Finally the crack tip plastic zone CTPZ was introduced to interpret the variations of KIC.

从疲劳裂纹尖端塑性区的角度阐述了影响材料断裂韧性的因素.

互联网

The advances on the fracture toughness in high impact polystyrene ( HIPS ) were reviewed.

综述了 高抗 冲 聚苯乙烯 断裂韧性方面研究工作的进展.

互联网

The tensile test is an effective method to research the crack stop on pipe.

并指出板状拉伸断裂韧性试验是研究钢管止裂的有效方法,应深入开展这方面的研究工作.

互联网

These liminates have higher fracture toughness and notchnotch sensitivity as compared with the balanced liminates.

与具有正泊桑比的常规平衡复合材料相比,这种材秆具有很高的断裂韧性.

互联网

With the decreasing of Al sheet thickness, constraint effect increase, and fracture toughness, JIC, also decrease.

随着其厚度尺寸的下降, 界面约束作用显著增强, 其断裂韧性, JIC值明显下降.

互联网

A method to solve tension softening relationship of concrete obtained a three - point bending test is presented.

确立了分别基于开裂强度准则和断裂韧性准则的由三点弯曲实验确定混凝土材料抗拉软化关系的方法.

互联网

Fracture toughness of heat - affected zone ( HAZ ) was between the base metal and weld metal.

焊接热影响区的断裂韧性介于母材和焊缝金属之间.

互联网